Pelco Sarix IMP521-1IS IP Camera Driver
Next Generation Sarix Professional Environmental Bullet w/IR POE 24 VAC, 12 VDC. Sarix Professional IP Bullet Environmental IMPIS (5Mpxl) Box Camera with SureVision . Pelco Way, Clovis, California USA. Next Generation Sarix Professional Environmental Bullet w/IR POE 24 VAC, 12 VDC. Sarix Professional IP Bullet Environmental IMPIS (5Mpxl) Box Camera with SureVision . Pelco Way, Clovis, California USA. IMPIS Pelco mm Varifocal 30FPS @ x Indoor IR Day/Night Dome IP Security Camera 12VDC/24VAC/POE (Pelco Indoor Dome IP Cameras). Sarix Professional Range Powerful, versatile, and affordable, the Sarix.
|Supported systems:||Windows 7/8/10, Windows XP 64-bit, Mac OS X 10.X|
|Price:||Free* [*Free Registration Required]|
Pelco Sarix IMP521-1IS IP Camera Driver
This manual provides the following information: The main functions and system requirements of the unit. Instructions on unit installation and wire connections. The main menu navigation and controls explanations. Therefore, please regard this manual where we use the example from IMPIS as a reference Pelco Sarix IMP521-1IS IP Camera apply to all the varied models. Therefore, please regard this manual where we use the example from IJPIS as a reference to apply to all the models.
The bottom case of the camera. The physical main body of the camera.
The screws for fixing lens base with back box. The inner adjustable liner to cover and beautify camera lens assembly.
The screws for fixing top cover with lens base. The top cover of the camera. Micro SD Card Slot: The slot is for inserting micro SD card for file storage. Press the button for 6 seconds to restore the camera s settings back to the factory default.
Press the button for below 1 second to reboot the camera. The bottom hole for cable entry. The side hole for cable entry. Connect the RJ connector to this port with a PoE Class 2 compatible network device that supplies power through the Ethernet cable.
Download Pelco Sarix IMPIS IP Camera Firmware for OS Independent
With solid green, the LED indicates a live connection is established. The conduit hole designed for bottom conduit cabling. The upper dome cover for the camera. The 2 latch bottoms along the 2 sides of top cover are the cruxes to disassemble the camera.
The conduit hole designed for side conduit cabling. Connect the RJ connector to this port with a PoE Class 2 compatible network device that supplied power through the Ethernet cable. Installation and Connection 2. In addition to this manual, the items below are included in the product box: Wall mount bracket for micro Pelco Sarix IMP521-1IS IP Camera dome models 2.
A drill Screwdrivers Wire cutters Checking Appearance Pelco Sarix IMP521-1IS IP Camera the protective materials used for the packaging should be able to protect the unit from most accidents during transportation, check the unit and its accessories for any visible damage. Remove the protective film to check items in accordance with the list in 2.
Loosen the 3 camera top cover screws. Gently pull the top cover downward to take it apart from the camera body.
Pelco Products - Sarix Enhanced Series Fixed IP Cameras
Further loosen the 3 camera lens base screws. Connect the power cable to the power port via one of the following 3 alternatives. Connect a power cable that supplies AC24V power source to the power terminal. Connect a power cable that supplies DC12V power source to the power terminal.
Connect an Ethernet cable terminated with RJ connector to the PoE RJ port for both power supply and network connectivity purposes simultaneously. Lift to open the inner liner Loosen another 3 screws of camera lens base via torx wrench supplied Remove the lens base from theback box. Attach the mounting template on a desired mounting surface normally for in-ceiling. Drill a round hole mm based on the template on the surface to have the Pelco Sarix IMP521-1IS IP Camera embedded within the hole later.
Place the supplied mounting template on a mounting surface. Drill 6 mm 0. Then insert 4 or 2 supplied plastic anchors into the holes. If you want to feed wiring from the hole on the top of the back box, create a circular opening corresponding to the Bottom conduit hole of mounting template on the mounting surface. If feeding wiring from the side of the back Pelco Sarix IMP521-1IS IP Camera, you don t need to drill a hole on the mounting surface.